Part 6
QUICK START-UP
LOADING PAPER
Desk Top Application
1.
Slide the hood lock toward the front of the
printer to release the hood as in
Pix. 1
.
2.
Raise the released hood
wide open manually as in
Pix. 2
.
3.
Drop the thermal paper roll
inside the printer in
orientation as shown in
Pix. 2
.
4.
Close the hood back leaving
the tail of the paper roll
coming out of the opening
between the hood and the top
cover as in
Pix. 3
. Tear off excessive paper.
When to Replace Paper
Whenever the printer gives paper out signal or a red line appears on
the thermal paper, it is the proper timing for replacing the paper. Do not wait
till the print engine is dragging the paper roll at the very end. Remove the
leftover and replace a new paper roll as illustrated above to prevent excessive
paper dust in the printer and consequently possibility for paper jam.
CONNECTING CABLES
Connection Area Pictures
Serial Connection
All the external connectors are in the recessed area at the rear
bottom
for PP-7000II. The serial connector is a 9-PIN D sub Female connector at the
PP-7000II
PP-7200L
PP-7000U
Pix. 2
Release Button
Pix. 1
Pix. 3
PP-7200U
