background image

POS 708 USER MANUAL Ver. 1.6 

 

 
 
 
Note: This equipment has been tested and found to comply with the limit for a class A digital device, pursuant to 
part 15 of the FCC rule. These limits are designed to provide reasonable protection against harmful interference 
when the equipment is operated in a commercial environment.  
 
This equipment generates uses and can radiate radio frequency energy and interference to radio communications. 
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will 
be required to correct the interference at his/her own expense. 

Disclaimer 

The Manufacturer

 makes no claims or warranties with respect to the content or accuracy of this publication or the 

product it describes, including warranties of fitness or merchantability for a particular purpose. The Manufacturer 
shall not be liable for any special, incidental or consequential damages, nor damages due to use or misuse born 
from integration into any mechanical, electrical or computer system. The Manufacturer is not responsible for the 
accuracy of any device connected to the POS708.  The Manufacturer reserves the right to make any changes to this 
manual or product(s) without obligation to notify any person of such changes. Warranty is void if the case is 
opened by anyone other then the Manufacturer’s repair department or authorized repair center.  

 
Epson, Star, Citizen and IBM are registered trademarks of the appropriate printer manufactures.  

 

Summary of Contents for POS 708









Reviews: