POSEIDON Xstream Deco, User Manual

Page: 17 / 36

XSTREAM USER MANUAL
DIVE90 1:ST STAGE (AIR)
Dive shares the performance and
specifications from the other Xstream 90
models. It is identified by the chrome
plated T.D.A. top and the number of
outlets: 5 low pressure and 2 highpressure.
Xstream Dive is delivered with a 70 cm
hose, but all hoses available for the
Xstream regulator also fits the Xstream
regulator.
The Dive90 was discontinued 2005 and
replaced with Deep90.
XSTREAM LP HOSES
All Xstream hoses are made of high quality
SBR/NR, and are available in different
lengths. For deep dives or in particularly
cold conditions a long hose 2.15m (7 ft)
has the benefit of warming the gas by as
much as 12°C (22°F) under certain conditions.
Using a long hose requires some basic
knowledge in its use and routing, to take
the full advantages.
Poseidon does not recommend the use of
hose protectors on Poseidon IP hoses.
Hose protectors have been shown to
mislead the user to neglect the necessary
pre-dive hose inspection. Therefore,
Poseidon hoses are fitted with wear
preventing end crimps, which in addition
can be inspected for the full engagement
of the hose to the insert at any time
through the inspection hole. On Xstream
specific hoses (article no 0130-NNN) the
hose end at the 2nd stage includes the
safety valve. As a visible indication of a
fault, the excessive gas will bleed to the
ambient environment.
The hose is available in the
following lengths as standard
2.15m (7ft.)
1.50m (4.9 ft)
0.90m (3 ft)
0.70m (2.3 ft)
15