3
♣
Di p Switch Configuration
Emulation mode, communications mode, baud rate, serial/parallel handshake, and head printing
characteristics are all configured through dip switch settings.
♣
Data Buffer
The EVO Impact printer has a built-in 16 Kilobyte I/O buffer allowing the host computer to free itself
after sending the print data.
♣
Reliable communications
The EVO Impact supports multiple baud rates, protocols, and handshaking on its parallel &
serial interfaces.
♣
User controls
A power switch, a paper feed switch, power LED and Paper Low/Out error LED provide ease of use.
♣
Self Test Mode
A comprehensive self-test mode is available which describes the printer configuration and dip switch
setting information along with the version number of firmware installed.
♣
Print orientation
The printer is capable of printing normal and upside down, the print orientation is selected by software
commands.
♣
Selectable international characters
The EVO Impact supports international characters selectable by software control.
♣
Multi ple Fonts/Sizes
Two different resident fonts are available for printing diversity. Each of these fonts can be printed in
normal, double wide, double height, and quadruple sizes. Both fonts and sizes are software selected.
♣
Bit image graphic
Two formats for bit mapped graphics are provided.
♣
Error detection
The EVO Impact can detect paper-out and paper-jam as well as paper near-end, controller malfunction,
and cover open status.
♣
Peri pheral Drive
Two cash drawer drivers are provided.
♣
Certification
(1) This device complies with Part 15 of the FCC Rules. Operation is subject to the following two
conditions:
1) this device may not cause harmful interference , and
2) this device must accept any interference received , including interference that may cause
undesired operation.
(2) UL/cUL (UL 60950-1)
(3) MIC
(4) CE-EMCD (CE-EMCD Class B should use Parallel shield Cable complied with IEEE-1284 standards)
(5) RoHS (TUV)
1. Features
