Page 13
V 1.1 – April 2016
U s e r I n s t r u c t i o n M a n u a l
Connecting the Gas & Power Supply
Connecting the Gas Supply
Check that the gas supply is within the system requirements.
The gas supply should be connected to the universal connector female 8mm (internal diameter) on
the rear of the unit. The connecting tube is a one-touch connection.
Gas pressure should not exceed 7 bar (100 PSI). Exceeding this pressure may damage the unit.
Connecting the Power Supply
The Ultravap Levante utilises a standard Euro inlet, which is fused and switched prior to inserting
the connector. Check that the correct voltage is being applied.
Air Supply
Inlet (8mm)
CAN
Connector
(Female)
Mains
Inlet
RS232
Connector
(Male)
