BIOS Setup Information
WEB-21B0 User
’s Manual
3-19
Stop Bits
Stop bits indicate the end of a serial data
packet. (A start bit indicates the beginning).
The standard setting is 1 stop bit.
Communication with slow devices may
require more than 1 stop bit.
★
1,2
Flow Control
Flow control can prevent data loss from
buffer overflow. When sending data, if the
receiving buffers are full, a ‘stop’ signal can
be sent to stop the data flow. Once the
buffers are empty, a ‘start’ signal can be
sent to re-start the flow. Hardware flow
control uses two wires to send start/stop
signals.
★
None
Hardware
RTS/CTS
VT-UTFB Combo Key Support
Enable VT-UTFB Combination Key Support
for ANSI/VT100 terminals
Disabled
★
Enabled
Recorder Mode
With this mode enable only text will be sent.
This is to capture Terminal data.
★
Disabled
Enabled
Resolution 100x31
Enables or disables extended terminal
resolution
★
Disabled
Enabled
Legacy OS Redirection Resolution On Legacy OS, the Number of Rows and
Columns supported redirection
★
80x24
80x25
Putty keypad
Select Function Key and Key Pad on Putty.
★
VT100
LINUX
XTERM6
SCO
ESCN
VT400
Redirection After BIOS POST
The Setting specify if Boot Loader is
selected then Legacy console redirection is
disable before booting to Legacy OS.
Default value always enable which means
Legacy console Redirection is enable for
Legacy OS.
★
Always
Enable
BootLoader
