Portwell WADE-8213-Q670E, User Manual

Page: 15 / 106

WADE-8213-Q670E
Copyright © Portwell 2022 WADE-8213-Q670E User's Guide 15
4.2 Jumpers Settings
For users to customize WADE-8213-Q670E’s features. In the following sections, Short means covering a jumper cap over jumper pins; Open or N/C (Not
Connected) means removing a jumper cap from jumper pins. Users can refer to Figure 1 for the Jumper allocations.
Jumper Table
The jumper settings are schematically depicted in this manual as follows:
J
umper Function List
1
CPU and Chassis Fan headers (4-pin CPU_FAN, 4-pin CHA_FAN)
2
Display panel VCC power selection (6-pin VCC_PWR_SEL)
3
LVDS/eDP Backlight panel connector (5-pin LCD_BLKT_PANEL)
4
ATX Power connectors (24-pin EATXPWR, 8-pin EATX12V)
5
Intel LGA1700 CPU socket
6
Digital Audio header (4-1 pin SPDIF_OUT)
7
Chassis Intrude header (4-1 pin CHASSIS)
8
AT/ATX mode selection (3-pin AT_ATX_SEL)
9
Serial Port headers (10-1 pin COM2, COM3, COM4, COM5)
10
General purpose input/output connector (10-pin GPIO_CON)
11
Speaker header (4-pin SPEAKER)
12
System Panel header (10-1 pin F_PANEL)
13
COM1/2 Ring/+5V/+12V selection jumpers (6-pin COM1_SEL, COM2_SEL)