Troubleshooting
WADE-8070 User’s Manual
5-1
Chapter 5
Troubleshooting
This chapter provides a few useful tips to quickly get WADE-8070 running with
success. As basic hardware installation has been addressed in Chapter 2, this chapter
will primarily focus on system integration issues, in terms of BIOS setting, and OS
diagnostics.
5.1
Hardware Quick Installation
ATX Power Setting
WADE-8070 supports ATX only. Therefore, there is no other setting that really needs
to be set up. However, there are only two connectors that must be connected—J26
(20pins Power Connector). Portwell wants to provide customer better performance
and more reliable system. By using this CPU Supplementary will enhance the power
drawing to the motherboard. However, J27, +12V CPU Supplementary Power
connector must be connected all the time. Otherwise, the system will fail to boot up.
Serial ATA and IDE Hard Disk Setting
Unlike IDE bus, each Serial ATA channel can only connect to one SATA hard disk at a
time; there are total two connectors, J14 and J15. The installation of Serial ATA is
simpler and easier than IDE, because SATA hard disk doesn’t require setting up
Master and Slave, which can reduce mistake of hardware installation.
