manualshive.com logo in svg

Portwell WADE-8065, User Manual

Share
Download
Portwell WADE-8065 User Manual Download Page 40

BIOS Setup Information

 

WADE-8065 User’s Manual 

4-14 

 

IDE DMA transfer access 

The choice: Enabled, Disabled. 
 

On-Chip Primary PCI IDE 

The chipset contains a PCI IDE interface with support for two IDE channels.  Select 
Enabled to activate the primary IDE interface.  Select Disabled to deactivate this 
interface. 
 
The choice: Enabled, Disabled 
 

IDE Primary/Secondary Master/Slave PIO 

The four IDE PIO (Programmed Input/Output) fields allow set a PIO mode (0-4) for 
each of the four IDE devices that the onboard IDE interface supports.  Modes 0 
through 4 provide successively increased performance.  In Auto mode, the system 
automatically determines the best mode for each device. 
 
The choice: Auto, Mode 0, Mode 1, Mode 2, Mode 3 and Mode 4. 
 

IDE Primary/Secondary Master/Slave UDMA 

Ultra DMA/33/66/100 implementation is possible only if IDE hard drive supports 
and the operating environment includes a DMA driver (Windows 95 OSR2 or a 
third-party IDE bus master driver).  If your hard drive and system software both 
support Ultra DMA/33/66/100, select Auto to enable BIOS support. 
 
The choice: Auto, Disabled. 
 

On-Chip Serial ATA 

Disabled 

Disabled SATA Controller. 

Auto 

Auto arrange by BIOS. 

Combined Mode 

PATA and SATA are combined. Max. Of 2 IDE drives in each channel. 

Enhanced Mode 

Enable both SATA and PATA. Max. Of 6 IDE drives are Supported. 

SATA Only 

SATA is operating in legacy mode. 

 

 

The choice: Disabled, Combined Mode, Enhanced Mode. 
 

Summary of Contents for WADE-8065































































Reviews:

No comments

Brands by name

Popular brands

Load more brands