Portwell WADE-8065 User Manual Download Page 37

Page: 37 / 62

BIOS Setup Information

WADE-8065 User’s Manual

4-11

SLP_S4# Assertion Width.

The choice: 4 to 5 Sec, 4 to 3 Sec, 2 to 3 Sec and 1 to 2 Sec.

System BIOS Cacheable.

The choice: Enabled, Disabled.

Video BIOS Cacheable.

The choice: Enabled, Disabled.

Memory Hole At 15-16M

The choice: Enabled, Disabled.

PCI Express Root Port Func.

Phoenix- AwardBIOS CMOS Setup Utility

PCI Express Root Port Func

Item Help

PCI Express Port 1

[Auto]

PCI Express Port 2

[Auto]

PCI Express Port 3

[Auto]

PCI Express Port 4

[Auto]

PCI Express Port 5

[Auto]

PCI Express Port 6

[Auto]

PCI-E Compliancy Mode

[v1.0a]

Menu Level

↑↓→←

: Move Enter: Select +/-/PU/PD: Value F10: Save ESC: Exit F1: General Help

F5: Previous Values F6: Fail-Safe Defaults F7: Optimized Defaults

PEG/Onchip VGA Control

The choice: Onchip VGA, PEG Port and Auto.

On-Chip Frame Buffer Size

Users can set the display memory size that shared from main memory.

The choice: 1MB, 8MB.

DVMT Mode

The choice: FIXED, DVMT, BOTH.

DVMT/FIXED Memory Size

The Choice: 64MB, 128MBand 224MB.

Summary of Contents for WADE-8065






























































Search results

Summary of Contents for WADE-8065

Reviews:

Brands by name

Popular brands

Portwell WADE-8065, User Manual

Search results

Summary of Contents for WADE-8065

Reviews:

Brands by name

Popular brands