Troubleshooting
WADE-8041 User’s Manual
5-3
5.3 FAQ
Symptom: SBC keeps beeping, and no screen has shown.
Solution:
In fact, each beep sound represents different definition of error message.
Please refer to table as following:
Beep sounds
Meaning
Action
One long beep with one
short beeps
DRAM error
Change DRAM or reinstall it
One long beep constantly DRAM error
Change DRAM or reinstall it
One long beep with two
short beeps
Monitor or Display
Card error
Please check Monitor connector
whether it inserts properly
Beep rapidly
Power error warning Please check Power mode setting
Information & Support
Question: Why cannot I install USB 2.0 driver?
Answer:
If you are using Windows 2000, you need to update your Service-Pack
version to Service-Pack 4. If you are using Windows XP, you need to
update Service-Pack to Service Pack 1 at least.
If you cannot find BIOS that you need, please contact with Technical
Support Department to request a new BIOS to solve this problem.
Technical Support Department
Mailto:
Question: I forget my password of system BIOS, what am I supposed to do?
Answer:
You can simply short 1-2 pins on JP6 to clean your password.
Note:
Please visit our technical web site at
http://www.portwell.com.tw
For additional technical information, which is not covered in this manual.
