Troubleshooting
WADE-8013/WADE-8014 User’s Manual
5-5
5. Execute the zip file to root of the bootable USB pen drive which can boot
to DOS mode.
6. Insert your bootable USB pen drive in WADE-8013/WADE-8014 board
and power-on.
7. Boot to DOS mode then input the “Update” command to start to update
BIOS process.
8. Switch “Off” the Power Supply when you finished the update process.
9. Wait 5 seconds then switch “ON” the Power Supply then press the “F2”
Key to BIOS to select “Load Setup Defaults” and then select “Exit Saving
Changes” option.
Note:
Please visit our technical web site at
http://www.portwell.com.tw
For additional technical information, which is not covered in this manual, you can
mail to
or you can also send mail to our sales, they will be
very delighted to forward them to us.
System Memory Address Map
Each On-board device in the system is assigned a set of memory addresses, which
also can be identical of the device. The following table lists the system memory
address used for your reference.
Memory Area
Size
Device Description
0000-003F 1K
Interrupt
Area
0040-004F
0.3K
BIOS Data Area
0050-006F 0.5K
System
Data
0070-0E2E 54K
DOS
0E2F-0F6B 5K
Program
Area
0F6C-9D7F 568K
【
Available
】
First Meg
= Conventional memory ends at 630K =
9D80-9DFF
2K
Extended Bios Area
9E00-9FFF 8K
Unused
A000-AFFF 64K
VGA
Graphics
B000-B7FF 32K
Unused
B800-BFFF 32K
VGA
Text
C000-CE5F 57K
Video
ROM
CE60-EFFF 134K
Unused
F000-FFFF 64K
System
ROM
HMA
64K
First 64k Extended
