Troubleshooting
ROBO-8920VG2 User’s Manual
5-2
5.2
Frequency Asking Questions (FAQ)
Q: I have one IDE hard disk and one SATA hard disk. How can I assign SATA
Hard disk as First boot device?
A:
User just only adjusts the jump of IDE HDD to set at master device.
SATA HDD will be automatically detected. Eventually, please refer 4.5 “Advanced
BIOS Features”, and then enter “Hard Disk Boot Priority” to set HDD device boot
priority.
Q: If I wanna adopt CF card on ROBO-8920VG2, and equip one IDE HDD and one
CD-ROM devices at simultaneously, why the BIOS diagnostic is not regular?
A:
Don’t adopt CF card and employ IDE HDD and CD-ROM at J7 (channel 1)
simultaneously, because those devices use the same channel form J7; user can adopt
CF card and only one IDE device by J7 connecter; otherwise, it will occur conflict
situation.
(
Caution! Master channel is form CF storage, so user must set slave for IDE
HDD at simultaneously at J7)
Q: Since ROBO-8920VG2 has two Gigabit Ethernet onboard, could ROBO-
8920VG2 support Intel® fault tolerance function, or what people called teaming
function?
A:
Yes, ROBO-8920VG2 fully supports teaming function without any required
change. What has to be done is to install Intel® PRO drivers we provided in Portwell
Driver CD, and then go to device manager to enable teaming function. However, for
further information, please feel free to contact [email protected]
