BIOS Setup Information
ROBO-8920VG2 User’s Manual
4-11
Typematic Rate Setting
Keystrokes repeat at a rate determined by the keyboard controller – When enabled,
the typematic rate and typematic delay can be selected.
The choice: Enabled, Disabled.
When user sets the default at “Enabled”, he will be able to adjust both items of
typematic rate and typematic delay.
※
Typematic Rate (Chars/sec)
The rate at which character repeats when you hold down a key.
The choice: 6, 8, 10, 12, 15, 20, 24, and 30. (Default 6)
※
Typematic delay (Msec)
The delay before keystrokes begin to repeat.
The choice: 250, 500, 750, and 1000. (Default 250)
Security Option
Select whether the password is required every time the system boots or only when
you enter setup. (Default Setup)
System
The system will not boot and access to Setup will be denied if the
correct password is not entered at the prompt.
Setup
The system will boot, but access to Setup will be denied if the
correct password is not entered at the prompt.
APIC Mode
The choice: Enabled, Disabled.
MPS Version Control For OS
Not changeable with APIC Mode set to disabled.
The choice: 1.1, 1.4.
OS Select For DRAM > 64MB
Select OS/2 only if you are running OS/2 operating system with greater than 64MB
of RAM on the system.
The choice: Non-OS2, OS2.
Console Redirection
The choice: Enabled, Disabled.
