Portwell ROBO-8115VG2AR, User Manual

Page: 96 / 98

ROBO-8115VG2AR
Copyright © Portwell 2021 ROBO-8115VG2AR User's Guide 96
Question: How to update the BIOS file of ROBO-8115
Answer:
1. Please visit web site of
Portwell download center as below hyperlink
https://www.portwell.com.tw/support-center/download-center/
2. Select “ Search download ” and type the keyword “ROBO-8115”.
3. Find the “BIOS “
page and download the ROM file and flash utility.
4
. Unzip file to bootable USB flash drive which can boot to dos mode. Then execute the “update.bat” or “update.efi ”. It will start to update BIOS. NOTE: Once
you use “update.efi” to update BIOS, it must be get into the SHELL MODE to update BIOS
5. When you see the “FPT Operation Passed” message, which means the BIOS update processes finished. Please cut the AC power off and wait for 10
seconds before powering on.
6. When you see the “ Programming success ” message, which means the BIOS update processes finished. Please cut the AC power off and wait for 10
seconds before powering on.
Question: What are the display options while using ROBO-8115 board?
Answer: -
The ROBO-8115 supports DVI-I and HDMI display output.
Note:
Please visit our Download Center to get the Catalog, User manual, BIOS, and driver files.
https://www.portwell.com.tw/support-center/download-center/
If you have other additional technical information or request which is not covered in this manual, please fill in the technical request form as below hyperlink.
https://www.portwell.com.tw/support-center/technical-request/?lang=zh-hant
We will do our best to provide a suggestion or solution for you.
Thanks