System Installation
PQ7-M102XL Series User Manual
3-2
3.3
Main Memory
PQ7-M102XL provides up to 1GBytes of on-board DDR2-SDRAM as main memory.
Memory clock and related settings can be detected by BIOS via SPD interface.
Memory frequency / CPU FSB synchronization
PQ7-M102XL supports different memory frequencies depending on the CPU front
side bus and the type of DDR2-SDRAM.
CPU FSB
Memory Frequency
533MHz
533MHz
400MHz
400MHz
3.4
Installing the Single Board Computer
To install your PQ7-M102XL into standard chassis or proprietary environment,
please perform the following:
Step 1 : Check all jumpers setting on proper position
Step 2 : Install and configure CPU and memory module on right position
Step 3 : Place PQ7-M102XL into the dedicated position in the system
Step 4 : Attach cables to existing peripheral devices and secure it
WARNING
Please ensure that SBC is properly inserted and fixed by mechanism.
Note:
Please refer to section 3.4.1 to 3.4.4 to install INF/VGA/LAN/Audio drivers.
3.4.1
Chipset Component Driver
The chipset on PQ7-M102XL is a new chipset that a few old operating systems might
not be able to recognize. To overcome this compatibility issue, for Windows
Operating Systems such as Windows XP/VISTA, please install its INF before any of
other Drivers are installed. You can find very easily this chipset component driver in
PQ7-M102XL CD-title.
