Portwell NANO-6051 User Manual Download Page 59

Page: 59 / 81

NANO-6051

Feature

Description

Options

PCH LAN Controller

Enable /Disable onboard NIC

★

Enabled , Disabled

Wake on LAN

Enable/Disable integrated LAN to wake the system.

★

Enabled , Disabled

Intel I210 LAN Controller

Enable or Disable

ntel I210 LAN Controller#1.

★

Enabled , Disabled

Wake on LAN

Enable /Disable integrated LAN to wake the system.

★

Enabled , Disabled

Launch UEFI PXE Rom

Enable/Disable UEFI Network Stack

★

Disabled, Enabled

Launch UEFI PXE Rom[Enable]

Ipv4 PXE Support

Enable /Disable IPv4 PXE Support .If disable, IPv4 PXE boot support will not be available.

★

Enabled , Disabled

Ipv4 HTTP Support

Enable /Disable

Ipv4 HTTP Support. If disable, IPv4 HTTP boot support will not be available.

★

Enabled , Disabled

Ipv6 PXE Support

Enable /Disable Ipv6 PXE Support .If disable, IPv6 PXE boot support will not be available.

★

Enabled , Disabled

Ipv6 HTTP Support

Enable /Disable Ipv6 HTTP Support. If disable, IPv6 HTTP boot support will not be available.

★

Enabled , Disabled

IPSEC Certificate

Support to Enable/Disable IPSEC certificate for Ikev

★

Enabled , Disabled

PXE boot wait time

Wait time in seconds to press ESC key to abort the PXE boot. Use /- or numeric keys
to set value.

★

Media detect count

Number of times the presence of media will be checked. Use /- or numeric keys to set
value.

★

Summary of Contents for NANO-6051

















































































Search results

Summary of Contents for NANO-6051

Reviews:

Related manuals for NANO-6051

Brands by name

Popular brands

Portwell NANO-6051, User Manual

Search results

Summary of Contents for NANO-6051

Reviews:

Related manuals for NANO-6051

Brands by name

Popular brands