Troubleshooting
NANO-6040/NANO-6040L User’s Manual
5-4
5.3 Q&A
Question:
Don’t find any Clear CMOS jumper.
Answer:
There is no hardware implementation for clearing the CMOS in the Queens
Bay platform.
Question:
We find the Read/Write speed of the NANO-6040 USB port in Windows
XP is slower than Win7.
Answer:
The USB port read/write speed is only
98Mb/s
in Windows XP. It is a
chipset limitation.
Question:
We don’t find any jump setting to switch COM port function
(RS-232/422/485) in NANO-6040 board.
Answer:
The COM port function can be selected in NANO-6040 BIOS.
Please select
Advanced
Æ
Super IO Configuration
Æ
Select UART Mode
to select RS232/RS485/RS422 mode.
Question:
How to install the Windows XP with USB devices in NANO-6040 board?
Answer:
Please follow those steps as below.
1. Copy the files in 'FD_Inst_WinXP' in the SATA driver package to the root of a
floppy disk.
The SATA driver package can be obtained from
— iohsata.cat
— iohsata.inf
— iohsata.sys
— txtsetup.oem
2. Make sure that the target computer has a compatible
floppy drive.
3. Insert the floppy disk prepared in
step 1
into the floppy drive.
4. Insert the Windows XP SP3 installer into the CD-ROM and boot from the CD-ROM
to start the Windows XP SP3 installation.
5. Press
<F6>
to add further SCSI/RAID drivers when prompted during the very
early stage of the Windows installation.
