System Overview
NANO-6040/NANO-6040L User’s Manual
1-2
z
System BIOS
-
AMI uEFI BIOS
z
Main Memory
-
1GB or 2GB DDR2 memory on board
z
Power input
-
DC 12V input on rear I/O
-
4pin +12V power connector on board
-
(DC 12V Jack and 4pin power connector can’t be used at the same time)
z
Serial Port
-
Support one RS232/422/485 port on rear I/O for NANO-6040 series (adjust
by bios)
-
Support one RS232/422/485 port by on board connector for NANO-6040L
series (adjust by bios)
z
USB Interface
-
Support five USB (Universal Serial Bus) ports, two on rear I/O and three on
board header for internal devices.
z
SATA Interface
-
Support two SATA II ports
z
SD interface
-
Support one SD socket
-
Support boot from SD card
z
Audio Interface
-
Rear I/O Audio Jack for Mic-In and Line-Out (NANO-6040 series)
-
Rear I/O Audio Jack for Line-Out (NANO-6040L series)
-
On-Board pin header for Mic-In and Line-Out
z
Watch Dog Timer
-
Support WDT function through software programming for enable/disable
and interval setting
-
General system reset
z
Display
-
Support dual independent display by VGA and 18/24-bit LVDS
z
On-board Ethernet LAN
-
One Gigabit Ethernet (10/100/1000 Mbits/sec) LAN ports using Intel
82574IT PCI-Expressx1 interface GbE Controller
-
Support Wake on LAN function
z
High Drive GPIO
-
On-board programmable 8-bit Digital I/O interface
z
Cooling Fans
-
Support one 3-pin power connector for system fan
