System Overview
NANO-5050 User’s Manual
1-2
z
System BIOS
-
Phoenix uEFI BIOS
z
Main Memory
-
One 204pin DDR3 SODIMM socket on board up to 4GB system memory
z
Power input
-
DC 12V input on rear I/O
-
4pin +12V power connector on board
-
(DC 12V Jack and 4pin power connector can’t be used at the same time)
z
Serial Port
-
Support one RS232/422/485 port on-board connector (adjust by bios)
z
USB Interface
-
Support six USB 2.0 (Universal Serial Bus) ports, two on rear I/O and four on board
header for internal devices.
z
SATA Interface
-
Support one SATA II ports
z
CF-SATA interface
-
Support one CF-SATA socket
-
Support both CF card and CF-SATA card
z
Audio Interface
-
Mic-In and Line-Out Audio Jack on rear I/O
z
Watch Dog Timer
-
Support WDT function through software programming for enable/disable and
interval setting
-
General system reset
z
Display
-
Support triple independent display by DP (rear I/O), VGA (on-board connector)
and single channel 18/24-bit LVDS
-
Only support dual display simultaneously
z
On-board Ethernet LAN
-
One Gigabit Ethernet (10/100/1000 Mbits/sec) LAN port using Intel 82583V PCI-
Expressx1 interface GbE Controller
-
Support Wake on LAN function
z
High Drive GPIO
-
On-board programmable 8-bit Digital I/O interface
z
Cooling Fans
-
Support one 3-pin power connector for system fan
z
System Monitoring Feature
-
Monitor system temperature and major power sources.
z
Outline Dimension (L x W)
-
120mm(4.72’’) x 120mm(4.72’’)
