Portwell COM Express PCOM-B700G User Manual Download Page 63

Page: 63 / 167

COM Express

™

PORTWELL PCOM-B700G User's Guide

D35

10G_PHY_SEL_01

Phy mode select pin: If high Phy0

and Phy1 are configured by MDIO.

If low Phy2 and Phy3 are

configured by I2C. For MDIO

mode, this pin should be left not

connected on the Carrier. For I2C

mode pull down with 1K on Carrier

3.3V Suspend / 3.3V

D36

RSVD

D37

RSVD

D38

10G_SFP_SCL1

I2C clock signal of the 2-wire

management interface used by the

10GbE controller to access the

management registers of an

external Optical SFP Module

I/O

3.3V Suspend / 3.3V

PU 4.7K to

3VSB

D39

10G_SFP_SCL0

I2C clock signal of the 2-wire

management interface used by the

10GbE controller to access the

management registers of an

external Optical SFP Module

I/O

3.3V Suspend / 3.3V

PU 4.7K to

3VSB

D40

10G_SDP1

Software-Definable Pins. Can also

be used for IEEE1588 support

such as a 1pps signal

I/O

3.3V Suspend / 3.3V

PU 1K to

3VSB

D41

GND(FIXED)

D42

10G

10GBASE-KR ports, transmit

output differential pairs.

AC coupled on

Carrier

D43

10G_KR_TX1-

10GBASE-KR ports, transmit

output differential pairs.

AC coupled on

Carrier

Summary of Contents for COM Express PCOM-B700G








































































































































































Search results

Summary of Contents for COM Express PCOM-B700G

Reviews:

Portwell COM Express PCOM-B700G, User Manual, Page: 63 / 167

Search results

Summary of Contents for COM Express PCOM-B700G

Reviews: