System Installation
WEB-45H3 User
’s Manual
3-38
3.6 Save & Exit
Feature
Description
Options
CSM
Enable to launch the Compatibility Support Module. If you are
using Windows 8 or later versions 64-bit UEFI and all of your
devices support UEFI, you may also disable CSM for faster
boot speed.
★
Disable, Enabled
CSM[Enable]
Launch PXE
OpROM Policy
Select UEFI only to run those that support UEFI option ROM
only. Select Legacy only to run those that support legacy
option ROM only. Select Do not launch to not execute both
legacy and UEFI option ROM.
★
Legacy only, Do not
launch, UEFI only,
Launch Storage
OpROM Policy
Select UEFI only to run those that support UEFI option ROM
only. Select Legacy only to run those that support legacy
option ROM only. Select Do not launch to not execute both
legacy and UEFI option ROM.
★
Legacy only ,Do not
launch, UEFI only
Feature
Description
Options
Save Changes and
Exit
Exit system setup after saving the changes.
F10 key can be used for this operation.
Discard Changes and
Exit
Exit system setup without saving any changes.
Esc key can be used for this operation.
Discard Changes
Discard Changes done so far to any of setup options.
F7 key can be used for this operation.
Load UEFI Defaults
Load UEFI Default values for all the setup question.
F9 key can be used for this operation.
Launch EFI Shell
from filesystem device
Attempts to Launch EFI Shell application (Shell.efi) from one
of the available filesystem devices.
