3.
Drill holes in the guides. Using a drill of ø6 mm make a hole
through all chambers of the guide, and using a drill of ø10 mm
increase the hole in first two walls on the outer side of the guide
.
9.
Precisely slide the box onto the guides, carefully inserting
the side pins into the top of the guides
.
8.
Make a hole for the mechanism in the marked place with
a drill ø12 mm
.
7.
Mark the drilling place for the cardan crank mechanism on the
wall - 20 mm from the outer edge of the guide and 200 mm
from the edge of the window recess/ frame
.
200 mm
20 mm
6.
In the version of the blind with a mosquito net, fasten the
mosquito net guides as shown in the figure above with 4.2x13
screws mounted every 50 cm
.
5.
Fasten the guides to the window frame with appropriate
screws - minimum three per side. (The PORTOS company
offers guide drilling free of charge)
.
4.
Prepare the guides - screw the bottom plugs to the guides
using 3x16 screws. Break out a part of the side wall in the
plug of the guide with a mosquito net, as shown in Figure 1
.
1
3a.
Drill holes in the guides. Using a drill of ø6 mm make a hole
through all chambers of the guide, and using a drill of ø10 mm
increase the hole in first three walls on the outer side of the guide
.
ø 6
ø 10
F-FBR-10, F-FBR-20
F-FBR-30, F-FBR-40
ø 6
ø 10
4
INSTALLATION OF ZF3000
-BX
EXTERNAL BLINDS
max. 800mm
2.
