Before starting installation of the external blind, please read the following instructions
.
During transportation and storage, the blind should lie horizontally in a place protected from damage
to the entire structure. The blind should not be placed on the side wall. Any modifications
or changes to the design of the external blind can only be made after consultation with the manufacturer.
Blinds should be installed on an even surface
.
Installation of external blinds should be conducted by persons competent in the area
of compliance with health and safety rules and applicable building regulations.
In the case of external blinds operated with an electric drive, the installation can only be carried out by a person
with appropriate permissions (SEP rights up to 1 kV)
.
Directly before installation, unpack the blind and check if there are all elements necessary
for its installation
.
1.
Tools needed to install the external blind. The PORTOS company does not provide screws, dowels, cables for placing
the electrical installation
.
2.
In the case of dimensioning, the smallest dimension taken, is the right dimension
.
Dimensioning - ZF3000 external blind
aluminium guides, installation in the window recess
Dimensioning - ZF3000 external blind
aluminium guides,
installation on the facade/ flush-mounted installation
Sz = So
Wz
=
W
o
EXPLANATIONS TO DIMENSIONING
:
Sz
- blind width
, So
- hole width
, Wz
- blind height
,
Wo
-
height of the hole together with the box height
Sz = So*, Wz = Wo
So
W
o
Wz
Ws
P
P
EXPLANATIONS TO DIMENSIONING
:
Sz
- blind width
, So
- hole width
Wz
- blind height
, Wo
- hole height
, Ws
- box height
P
-
guide width (27mm)
,
Wz = Wo + Ws
Installation on the facade
:
Sz = So + 2 x P
Flush-mounted installation
:
Sz =
window width
*
ø 6,10,12
INSTALLATION WITH GUIDES
* -
It is recommended to take into account the installation clearance for free processing of wood elements
.
NOTE
-
In the case of installation in the window recess, make sure the recess width and height are equal in all points.
If they are different, assume the dimension of the minimum or make a proper correction of the hole
.
3
INSTALLATION OF ZF3000
-BX
EXTERNAL BLINDS
