1.
Connection scheme
:
The receiver shall be connected to the Hirschmann plug socket (STAS 3) installed in
the motor. On the other side of the receiver, the power cord ended with the
Hirschmann plug (STAK 3) shall be connected as per the scheme
.
Connection scheme of the radio receiver
:
2.
Configuration of the first remote control
:
1.
The receiver must be switched off
.
2.
On the remote control, select the channel that is to be assigned to the receiver
.
3.
Press and hold the 'up' button for 4 seconds at the minimum, until the diode in the remote
control lights up permanently. Do not let go of the pressed button
.
4.
Holding the 'up' button pressed all the time, connect the receiver to power supply. The
UP/DOWN motor movement indicates successful activation of the configuration mode.
Let go of the pressed 'up' button
.
5.
Within several seconds, once again press the 'up' button. The receiver will be assigned
to the remote control, the UP/DOWN motor movement will confirm successful
performance of the operation
.
OFF
min. 4 seconds
ON
The receiver connector
RECEIVER
Phase
Phase
Neutral
Protection
Black
Blue
Green and yellow
2
1
Neutral
