Portland 62567 Owner'S Manual & Safety Instructions Download Page 11

Page: 11 / 16

Page 11

For technical questions, please call 1-888-866-5797.

Item 62567

SAFET

ERA

TION

AINTENAN

SETU

Trimmer Operation

1. If head is in vertical position, pull back

on Angle Sleeve, rotate head 180°,

and release Angle Sleeve.

cAUTION! Make sure Angle Sleeve

locks in the new position.

2. To adjust head angle, press the

Head Angle Button (27), adjust as desired, and

release Button.

cAUTION! Make sure head angle

locks in the new position.

3. Clear the work area of all fragile objects and all

objects that may be thrown during operation.

Keep extension cord clear of work area.

4. Remove the Blade Cover and keep it available.

5. Make sure Trigger is released, then connect

the Power Cord to the extension cord,

see

Using cord Hook

on page 9.

6. Squeeze the Trigger, and slowly move the

spinning Line across the work area.

cAUTION! DO NOT STRIKE THE HEAD,

doing so may damage it and cause it to break.

7. To prevent accidents, turn off the appliance

and unplug it after use. Clean, then cover the

Trimming Blade with the Blade Cover and store

the appliance indoors out of children’s reach.

Edger Operation

1. If head is in horizontal position, pull

back on Angle Sleeve, rotate head 180°,

and release Angle Sleeve.

cAUTION! Make sure Angle Sleeve

locks in the new position.

2. To adjust head angle, press the

Head Angle Button (27), adjust as desired, and

release Button.

cAUTION! Make sure head angle

locks in the new position.

3. Clear the work area of all fragile objects and all

objects that may be thrown during operation.

Keep extension cord clear of work area.

4. Remove the Blade Cover and keep it available.

5. Make sure Trigger is released, then connect

the Power Cord to the extension cord,

see

Using cord Hook

on page 9.

6. Squeeze the Trigger, and slowly move the

spinning Line across the work area.

cAUTION! DO NOT STRIKE THE HEAD,

doing so may damage it and cause it to break.

7. To prevent accidents, turn off the appliance

and unplug it after use. Clean, then cover the

Trimming Blade with the Blade Cover and store

the appliance indoors out of children’s reach.

Summary of Contents for 62567

















Search results

Summary of Contents for 62567

Reviews:

Related manuals for 62567

Brands by name

Popular brands

Portland 62567, Owner'S Manual & Safety Instructions

Search results

Summary of Contents for 62567

Reviews:

Related manuals for 62567

Brands by name

Popular brands