Portland 62337 Owner'S Manual & Safety Instructions Download Page 23

Page 23

For technical questions, please call 1-888-866-5797.

Item 62337

PLEASE READ THE FOLLOWING CAREFULLY

THE MANUFACTURER AND/OR DISTRIBUTOR HAS PROVIDED THE PARTS LIST AND ASSEMBLY 

DIAGRAM IN THIS DOCUMENT AS A REFERENCE TOOL ONLY.  NEITHER THE MANUFACTURER 

OR DISTRIBUTOR MAKES ANY REPRESENTATION OR WARRANTY OF ANY KIND TO THE 

BUYER THAT HE OR SHE IS QUALIFIED TO MAKE ANY REPAIRS TO THE PRODUCT, OR 

THAT HE OR SHE IS QUALIFIED TO REPLACE ANY PARTS OF THE PRODUCT.  IN FACT, THE 

MANUFACTURER AND/OR DISTRIBUTOR EXPRESSLY STATES THAT ALL REPAIRS AND PARTS 

REPLACEMENTS SHOULD BE UNDERTAKEN BY CERTIFIED AND LICENSED TECHNICIANS, 

AND NOT BY THE BUYER.  THE BUYER ASSUMES ALL RISK AND LIABILITY ARISING OUT OF 

HIS OR HER REPAIRS TO THE ORIGINAL PRODUCT OR REPLACEMENT PARTS THERETO, 

OR ARISING OUT OF HIS OR HER INSTALLATION OF REPLACEMENT PARTS THERETO.

Limited 90 Day Warranty

Harbor Freight Tools Co. makes every effort to assure that its products meet high quality 

and durability standards, and warrants to the original purchaser that this product is free from 

defects in materials and workmanship for the period of 90 days from the date of purchase. 

This warranty does not apply to damage due directly or indirectly, to misuse, abuse, negligence 

or accidents, repairs or alterations outside our facilities, criminal activity, improper installation, 

normal wear and tear, or to lack of maintenance. We shall in no event be liable for death, 

injuries to persons or property, or for incidental, contingent, special or consequential damages 

arising from the use of our product. Some states do not allow the exclusion or limitation of 

incidental or consequential damages, so the above limitation of exclusion may not apply to you. 

THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES, EXPRESS OR 

IMPLIED, INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS.
To take advantage of this warranty, the product or part must be returned to us with transportation 

charges prepaid. Proof of purchase date and an explanation of the complaint must accompany 

the merchandise. If our inspection verifies the defect, we will either repair or replace 

the product at our election or we may elect to refund the purchase price if we cannot readily 

and quickly provide you with a replacement. We will return repaired products at our expense, 

but if we determine there is no defect, or that the defect resulted from causes not within 

the scope of our warranty, then you must bear the cost of returning the product.
This warranty gives you specific legal rights and you may also 

have other rights which vary from state to state.

Summary of Contents for 62337

























Reviews: