
Page 19
For technical questions, please call 1-888-866-5797.
Item 62337
19
TROUBLESHOOTING
PROBLEM
Unit will not blow
or mulcher.
1. Bag full
2. Blocked tube
3. Blocked impeller
4. Dirty bag
5. Torn bag
6. Bag unzipped
7. Unit unplugged
1. Empty the bag.
2. Clear the blockage.
3. Clear the blockage
4. Clean the bag.
5. Replace the bag.
6. Zip up the bag.
7. Plug into an outlet or an extension
cord.
Unit will not start.
1. Unit is unplugged.
2. Power/speed switch is in
the OFF position.
3. Defective power switch.
4. Vac tubes are not correctly
installed.
5. Intake gate/cover is not
closed.
6. Blower tube or bag
assembly not correctly
installed.
1. Check cord to make sure it is plugged
into an electrical outlet.
2. Slide switch to high or low.
3. Call techincal support: 1-888-866-5797
4. Check vac tubes to ensure that they
are allowing the switch to be engaged
when correctly installed.
5. Ensure that gate/cover is fully closed
and locked.
6. Check blower tube or bag assembly
7. House circuit may have
tripped.
7. Check wall circuit breaker panel and
to ensure that they are allowing the
switch to be engaged when correctly
installed.
reset if necessary.
POSSIBLE CAUSE
SOLUTION