7
3 Operating Guide
Getting Started
Clean removable parts prior to
first use.
Please see page 28 for
important and complete
PortionPro Rx cleaning steps.
Assemble Your PortionPro Rx
After all parts have been removed
from the packaging, washed, and
thoroughly dried, you’re ready
for the simple assembly and
programming of your new
PortionPro Rx:
1.
Reinsert the food belt system
by depressing the button in the
feeder base
1
and snapping
the system into place at the
bottom of the feeder base.
2.
Replace the food bin by setting
it back in place directly on
top of the feeder base with
the small square-shaped
opening on the bottom
above the food belt system.
3.
Replace the food bin lid
by inserting the lid tab into
the top of the food bin and
snapping the lid closed on the
right side near the finger grips.
The lid will remain in place
until you squeeze both finger
grips together to remove it.
4.
Insert the food bowl by
using the finger grip tab
to place the bowl into the
food bowl receptacle. Press
down to ensure it is fully
seated in the opening.
Read All Instructions Before Using
Your New PortionPro Rx Feeder
Select the Right Location for
Your PortionPro Rx
For best results, the ideal location
for your PortionPro Rx will meet
the following criteria:
●
Flat, stable floor surface
●
Within 6 feet of a
standard wall outlet
●
In a low-traffic, yet
accessible area (e.g., kitchen
nook or utility room)
●
In a position where the
front and sides of the
PortionPro Rx are easily
accessible to your pet
●
At least 6 feet away from
other PortionPro Rx feeders
1
