background image

Printed in China

The distributor warrants all of its lighting fixtures against defects in materials and workmanship for 
one (1) year from the date of purchase. If within this period the product is found to be defective, take 
a copy of the bill of sale as a proof of purchase and the product in its original carton to the place of 
purchase. The distributor will, at its option, repair, replace or refund the purchase price to the 
consumer. All costs of installation and removal of the fixture is the responsibility of the consumer. This 
warranty does not cover fixtures becoming defective due to misuse, accidental damage or improper 
handling and/or installation and specifically excludes liability for direct, incidental or consequential 
damages. As some states do not allow exclusions of limitations on an implied warranty, the above 
exclusion and limitation may not apply. This warranty gives you specific rights and you may also have 
other rights which may vary from state to state.

WARRANTY

8

JMLI1607

CARE AND MAINTENANCE

 

Clean only with soft, damp cloth. Do not use an abrasive cleaner on table.

TROUBLESHOOTING

WARNING: 

Before beginning work, shut off the power supply to avoid electrical shock.

Light does not come 
on initially or no longer
comes on.

  PROBLEM 

          POSSIBLE CAUSE 

CORRECTIVE ACTION

1. Bulb is burned out.
2. Power is OFF.
3. Lamp is not plugged in.

1. Replace light bulb.
2. Make sure power supply is ON.
3. Plug lamp into outlet.

Summary of Contents for TL05BZ









Reviews: