ASSEMBLY INSTRUCTIONS
1. Unscrew canopy nuts (C) from fixture assembly (B)
and detach mounting bracket (A). Install the mounting
bracket (A) to a junction box (not included) with junction
box screws (AA).
Note: The preassembled screws on mounting bracket
(A) should protrude out from the junction box.
2. Attach shades (D) to the cups on fixture assembly (B),
securing with shade nuts (CC). Tighten with wrench (DD).
4. Make electrical connections using the wire connectors
(BB). Refer to ELECTRICAL CONNECTIONS in the Safety
Information section of page 3.
x 3
Wire Connector
BB
Hardware Used
5. Place the fixture assembly (B) against the
mounting surface, allowing the preassembled
screws on mounting bracket (A) to pass through
the canopy of the fixture assembly (B). Secure
with previously removed canopy nuts (C).
4
AA
x 2
Hardware Used
Junction
Box Screws
3.
Install bulbs (E) into sockets of fixture
assembly (B)
.
Lowes.com/portfolio
DD
Wrench
CC
Shade Nut
Hardware Used
x 1
x 4
5
1
2
1
2
4
3
AA
A
DD
D
B
5
4
A
B
C
BB
CC
B
E
