3
SAFETY INFORMATION
WARNING
• Before assembling the lighting fixture, refer to the caution titled ELECTRICAL
CONNECTIONS. If you feel you do not have enough electrical wiring experience, have the fixture
installed by a qualified, licensed electrician.
• Before starting installation, disconnect the pow
er by turning off the circuit breaker or by
removing the fuse at the fuse box. Turning the power off to the light switch is not sufficient to
prevent electrical shock.
•
This fixture is suitable for indoor use only.
•
To avoid risk of electric shock or fire, do not modify this lamp; if any modification is made, it
may render the product unsafe.
CAUTION
•
All electrical connections must be in accordance with local codes, ordinances and the
National Electrical Code.
•
This fixture is intended to be mounted to an outlet junction box. The box must be
directly supported by the building structure.
• Refer to the relamping label located near the la
mp holder for the recommended maximum
wattage; THE LAMP SUITABLE FOR USE IN OPEN LUMINAIRES.
• DO NO
T touch new bulb with bare hands as oil from skin may damage the lamp and cause
short bulb life.
•
Turn off power and allow bulbs to cool down before replacing
• ELECTRICA
L CONNECTIONS (Required Supply Circuit: 120V, 60Hz)
Connect the white wire(s) from the fixture to the white wire of the supply circuit. Connect the black
wire(s) from the fixture to the black wire of the supply circuit. Connect the green (or bare copper)
colored wire to the grounding conductor of the supply circuit. Use U.L./CSA
Listed wire connectors suitable for the size, type and number of conductors. No loose
strands or loose connections should be present. Secure wire connectors with U.L./CSA
Listed electrical tape.
Please read and understand the entire manual before attempting to assemble, operate or
install the product.
PREPARATION
Before beginning assembly of product, make sure all parts are present. Compare parts with
package contents list and hardware contents list. If any part is missing or damaged, do not attempt
to assemble the product.
Estimated Assembly Time: 30~60 minutes
Tools Required for Assembly (not included): Ladder, Phillips Screwdriver, Flathead
Screwdriver, Wire Cutters, Pliers, Safety Glasses
Helpful Tools (not included): Wire Stripper, Tape
Lowes.com/portfolio
