6
Lowes.com/portfolio
ASSEMBLY INSTRUCTIONS
Connect WHITE wire from fixture (A) to WHITE wire
from outlet box using existing wire connector or wire
connector (AA). Connect BLACK wire from fixture (A)
to BLACK wire from outlet box using existing wire
connector or wire connector (AA). Connect
BARE/GREEN ground wire from outlet box to BARE
wire from fixture (A) using existing wire connector or
wire connector (AA).
NOTE:
Screw wire connectors (AA) on in a clockwise
direction.
WARNING:
Never connect ground wire to white
or black power supply wires.
WARNING:
To reduce the risk of fire, electrical
shock or personal injury, wire connectors provided
with this light fixture are designed to accept only one
12-gauge house wire and two lead wires from the
light fixture. If your house wire is larger than
12-gauge or there is more than one house wire to
connect to the corresponding fixture lead wires,
consult an electrician for the proper size wire
connectors to use.
x 3
Insert panels (D), beveled side out, into each slot
on inside of housing (C).
Tip
: When inserting last panel (D), slide the panel
(D) down as far as possible on one side. Then,
while pressing in with your fingers at the bottom of
the panel (D), bring the top of the panel (D) in
toward the corner until the panel (D) slips into
place. This may require quite a bit of pressure but
be careful not to press so hard that you break
one or more panels (D)
.
6
5
C
5.
Unwrap BARE wire from BLACK and WHITE wires
on fixture (A). Prepare wire by stripping 3/4 inch of
insulation from wire ends using wire strippers (not
included).
6a.
6b.
4
4
6a
4
4
6b
Hardware Used
Wire Connector
AA
D
Outlet
Box
BARE/
GREEN
AA
A
WHITE
BLACK
AA
AA
BARE
