4
ASSEMBLY INSTRUCTIONS
1. Carefully fit the post fitter on the fixture body (C)
over the end of the post (not supplied), making
sure the post fitter is fully seated. Mark the drill
point for the 3 mounting screws using 3 mounting
holes as reference. After marking hole locations,
remove fixture from post and drill 1/16 in. pilot
holes for screws (AA).
1
2. Attach ground fixture wire to the ground wire
from the post (usually GREEN or BARE). Connect
the neutral WHITE or RIBBED side fixture wire to
the neutral usually WHITE wire from the post.
Connect the hot BLACK or SMOOTH side fixture
wire to the hot usually BLACK wire from the
post. Fasten wires together with a wire
connector (BB) and tightly wrap wire connector
(BB) with electrical tape (not included).
2
White Wire
From Post
Black Wire
From Post
Bare, or Green
Ground Wire
Bare, or Green
Fixture Ground Wire
From Post
White or
Ribbed Side
From Fixture
From Fixture
Black or
Smooth Side
BB
Hardware Used
BB
x 3
Wire
Connector
Post
Post Fitter
C
Lowes.com/portfolio
