33
EN
Care and maintenance
Descaling procedure
Warning: For safety reasons, the descaling
process cannot be interrupted and it takes
about 45 minutes.
The appliance can be descaled with the appliance
door opened or closed. The appliance must be in
standby prior to starting the descaling cycle.
To run a descaling cycle proceed as follows:
1.
Press the
“-”and “Clock” keys for 5 seconds.
The display shows “
CAL
” and there is an
intermittent beep (if you wish to cancel the
descale process at this stage wait a few
seconds until this function switches off).
2.
Press the
“Start”
key (3) to start the descaling
function.
3.
When the display shows “
0.5L
”, Short beeps
are emitted. Remove the water tank.
4.
Pour 0,5 litres of an adequate descaling
solution into the water tank and put the water
tank back.
5.
Press the
“Start”
key (3). The Descale cycle is
initiated and takes about 30 minutes.
6.
When the display shows “
1.0L
” flashing and the
oven emits a beep, remove and empty the
water tank.
7.
Fill the water tank with 1,0 litres of cold water
and put the water tank back.
8.
Press the
“Start”
key (3). The first rinsing cycle
starts.
9.
When the display again shows “
1.0L
” flashing
and the oven emits a new beep, remove and
empty the water tank.
10.
Fill the water tank with 1.0 litres of cold
water and put the water tank back.
11.
Press the
“Start”
key (3). The second rinsing
cycle starts.
12.
When the rinsing cycle has finished the
display shows “
End
”. The message
“DEP”
will
be displayed until the water tank is removed.
13.
Remove, empty and dry the water tank.
