17
CARE AND MAINTENANCE
A.
For manual height adjusters, semi-annually lubricate the entire threaded rod assembly and upper thrust roller bearing with any
high quality multi-purpose type grease.
B.
Periodically inspect height adjustment unit and support system for loose or defective parts – tighten or replace immediately as
required.
C.
Periodically (at least annually, depending on usage) lubricate the two plated inside tubes with an aerosol dry lubricant, such as
Sprayon™ #S00708 T.F.E. DRY LUBE. Sprayon™ #S00708 T.F.E. DRY LUBE is available from your local Porter dealer or
from Porter Athletic Equipment Company, in a 10 oz. aerosol can (Porter part number MISC00243000). Run height adjuster up
and down (10' to 8') several times. NOTE – protect the floor with a drop cloth to prevent a slippery build-up on the gymnasium
floor.
Lubricate both inside slide
tubes per Step C above
RECTANGULAR
BOARD SHOWN
TYPICAL
BOARD SHOWN
TYPICAL FAN
Lubricate threaded rod and upper
thrust roller bearing per Step A above
(manual operation only)
Porter Athletic Equipment Company
601 Mercury Drive, Champaign, IL U.S.A., 61822
Toll Free: (888) 277-7778
x
Phone: (217) 367-8438
x
Fax: (217) 239-2255
www.porterathletic.com
SAVE THESE INSTRUCTIONS FOR FUTURE USE
THIS WARNING IS GIVEN IN COMPLIANCE
WITH CALIFORNIA’S PROPOSITION 65:
WARNING
This product contains chemicals known to the
State of California to cause cancer, birth defects
or other reproductive harm.
WARNING
: This product can expose you to Titanium Dioxide,
which is known to the State of California to cause cancer.
For more information go to www.p65warnings.ca.gov.
E
