4
SECURE CABLE TO WINCH DRUM
6.
Route end of cable through hole in the winch drum and secure with set screw. Note that cable must be taped before cutting to
prevent the cable end from fraying. Be sure to route cable in the
UNDERWIND
direction as detailed on Page 1.
THERE
MUST BE A MINIMUM OF THREE (3) WRAPS OF CABLE ON THE DRUM WITH THE BACKSTOP IN THE
"DOWN" POSITION
.
7.
Test winch for proper operation. Install winch cover to wood pad, using four (4) #14 x 3/4" lg. sheet metal screws provided with
winch. See detail on Page 1.
8.
Refer to Maintenance note on Page 8.
9.
Demonstrate operation of manual winch to customer. Emphasize safety precautions and maintenance requirements as detailed on
Pages 7 and 8.
Summary of Contents for 00700-000
Page 5: ...5 MANUAL WINCH LOCATION...
