19
TROUBLESHOOTING GUIDE
To avoid injury from an accidental start, turn the switch OFF and always remove the plug from
the power source before making any adjustments.
REPLACEMENT PARTS
Use only identical replacement parts. For a parts list or to order parts, visit our service website
at www.portercable.com. You can also order parts from your nearest Porter-Cable Factory
Service Center or Porter-Cable Authorized Warranty Service Center. Or, you can call our
Customer Care Center at (888) 609-9779.
SERVICE AND REPAIRS
All quality tools will eventually require servicing and/or replacement of parts. For information
about Porter-Cable, its factory service centers or authorized warranty service centers, visit our
website at www.portercable.com or call our Customer Care Center at (888) 609-9779. All repairs
made by our service centers are fully guaranteed against defective material and workmanship.
We cannot guarantee repairs made or attempted by others.
You can also write to us for information at
Power Tool Specialists, Inc. 684 Huey Road, Rock
Hill, SC 29730
, - Attention: Product Service. Be sure to include all of the information shown on
the nameplate of your tool (model number, type, serial number, etc.).
WARNING
!
PROBLEM
PROBLEM CAUSE
SUGGESTED CORRECTIVE ACTION
Motor will not
run.
1. Not plugged into power outlet.
2. Switch is not in ON position.
3. Motor cord cut or abraded.
4. Plug on cord is faulty.
5. Faulty motor.
6. Fuse on circuit breaks open.
1. Plug it into the power outlet.
2. Turn the switch ON.
3. Contact Porter-Cable Service Center
or Authorized Service Station for
repair or replacement.
4. Contact Porter-Cable Service Center
or Authorized Service Station for
repair or replacement.
5. Contact Porter-Cable Service Center
or Authorized Service Station for
repair or replacement.
6. Re-set; may be too many machines
on line.
Grinding
wheel
vibrates or
shakes.
1. Grinding wheel is not fixed properly.
2. Other.
1. Adjust grinding wheel properly. See
ADJUSTMENT section.
2. Contact Porter-Cable Service Center
or Authorized Service Station for
repair or replacement.
For assistance with your product, visit our website at www.portercable.com for a list of service
centers, or call the Porter-Cable Customer Care Center at (888) 609-9779.
Summary of Contents for PCXB515BG
Page 11: ...11 UNPACKING YOUR BENCH GRINDER A B C D E F G...
Page 22: ...22 NOTES...
Page 23: ...23 NOTES...
