5
OPERATION
WARNING:
Before attempting any of the following
operations, make sure that the tool is switched off and
unplugged and that the saw blade has stopped. Used saw
blades can be hot.
BLADE INSTALLATION (FIGURE B)
- Push the saw blade locking lever (4) upward.
- With teeth facing forward, insert the shank of the saw
blade into the blade holder as far as it will go.
- Release the lever.
- Check to ensure blade is secure before cutting.
ADjUSTING THE SHOE FOR BEVEL CUTS
WARNING:
Never use the tool when the shoe (6)
is loose or removed.
The shoe can be set to a left or right bevel angle up to 45°.
- Turn saw upside down. Use the wrench (7) to loosen
the clamping screw (9) and clamp plate (10) as shown in
figure C.
- Slide the shoe (6) forward and rotate left or right to the
required angle.
- Slide the shoe backward so the shoe plate keyways
engage the two lock posts (11) on the tool as shown in
figure D.
- Tighten clamping screw and clamp plate with its
beveled side towards the tool.
B
A
1
2
4
8
5
6
7
3
C
10
9
D
11
FUNCTIONAL DESCRIPTION
1. Variable speed switch
2. Speed control dial
3. Lock-on button
4. Saw blade locking lever
5. Saw blade
6. Shoe
7. Wrench
8. Cutting action lever
