background image

9

Safety Warnings and Instructions: Sanders

ALWAYS WEAR EYE AND RESPIRATORY PROTECTION.

• Clean your tool out periodically.

Other Important Safety Warnings and Instructions

Sanding 

Lead based paint

Sanding of lead based paint is NOT RECOMMENDED due to the difficulty of controlling

the contaminated dust. The greatest danger of lead poisoning is to children and

pregnant women.

Since it is difficult to identify whether or not a paint contains lead without a chemical

analysis, we recommend the following precautions when sanding any paint: 

Personal safety

• No children or pregnant women should enter the work area where the paint sanding is

being done until all clean up is completed.

• A dust mask or respirator should be worn by all persons entering the work area. The

filter should be replaced daily or whenever the wearer has difficulty breathing.

NOTE: 

Only those dust masks suitable for working with lead paint dust and fumes

should be used. Ordinary painting masks do not offer this protection. See your local

hardware dealer for the proper (NIOSH approved) mask.

• NO EATING, DRINKING or SMOKING should be done in the work area to prevent

ingesting contaminated paint particles. Workers should wash and clean up BEFORE

eating, drinking or smoking. Articles of food, drink, or smoking should not be left in the

work area where dust would settle on them.

Environmental safety

• Paint should be removed in such a manner as to minimize the amount of dust

generated.

• Areas where paint removal is occurring should be sealed with plastic sheeting of 4 mils

thickness.

• Sanding should be done in a manner to reduce tracking of paint dust outside the work

area.

Cleaning and disposal

• All surfaces in the work area should be vacuumed and thoroughly cleaned daily for the

duration of the sanding project. Vacuum filter bags should be changed frequently.

• Plastic drop cloths should be gathered up and disposed of along with any dust chips or

other removal debris. They should be placed in sealed refuse receptacles and

disposed of through regular trash pick-up procedures. During clean up, children and

pregnant women should be kept away from the immediate work area.

• All toys, washable furniture and utensils used by children should be washed thoroughly

before being used again.

INSTALLING AND REMOVING THE BATTERY PACK FROM THE TOOL 

Make certain the switch is off to prevent switch actuation before removing

or installing battery.

TO  INSTALL BATTERY PACK:  Insert  battery  pack

into tool as shown in

figure C

.

:

C

90550099 PC1800DS Crdl Sander REVISED  4/1/09  1:52 PM  Page 9

Summary of Contents for PC1800DS














Reviews: