background image

5- ENG

A02231

HAZARD

HOW TO PREVENT IT

WHAT CAN HAPPEN

HAZARD

HOW TO PREVENT IT

WHAT CAN HAPPEN

RISK TO BREATHING

AIR

OBTAINED DIRECTLY FROM THE

COMPRESSOR 

SHOULD NEVER BE USED TO

SUPPLY AIR FOR HUMAN CONSUMPTION.

IN

ORDER TO USE AIR PRODUCED BY THIS
COMPRESSOR FOR BREATHING, SUITABLE

FILTERS AND

IN-LINE 

SAFETY EQUIPMENT

MUST BE PROPERLY INSTALLED

. IN-LINE

FILTERS AND SAFETY EQUIPMENT

USED IN

CONJUNCTION WITH THE COMPRESSOR

MUST BE CAPABLE OF TREATING AIR TO ALL
APPLICABLE LOCAL AND FEDERAL CODES
PRIOR TO HUMAN CONSUMPTION.

WORK IN AN AREA WITH GOOD CROSS-
VENTILATION.  

READ AND 

FOLLOW THE

SAFETY INSTRUCTIONS

PROVIDED ON THE

LABEL OR SAFETY DATA SHEETS 

FOR THE

MATERIAL YOU ARE SPRAYING. USE A
NIOSH/MSHA APPROVED RESPIRATOR

DESIGNED FOR USE WITH YOUR SPECIFIC
APPLICATION.

THE 

COMPRESSED AIR

DIRECTLY FROM

YOUR COMPRESSOR 

IS NOT SAFE FOR

BREATHING

. THE 

AIR STREAM MAY

CONTAIN CARBON MONOXIDE, TOXIC
VAPORS, OR SOLID PARTICLES

FROM THE

TANK. 

BREATHING

THESE

CONTAMINANTS

CAN CAUSE SERIOUS INJURY OR DEATH.

SPRAYED MATERIALS

SUCH AS PAINT, PAINT

SOLVENTS, PAINT REMOVER, INSECTICIDES,
WEED KILLERS, MAY 

CONTAIN HARMFUL

VAPORS AND POISONS.

RISK OF ELECTRICAL SHOCK

NEVER OPERATE THE COMPRESSOR
OUTDOORS WHEN IT IS RAINING OR IN WET
CONDITIONS.

NEVER OPERATE COMPRESSOR WITH
PROTECTIVE COVERS

REMOVED

OR

DAMAGED. 

ANY 

ELECTRICAL WIRING OR REPAIRS

REQUIRED ON THIS PRODUCT 

SHOULD BE

PERFORMED BY AUTHORIZED SERVICE
CENTER PERSONNEL

IN ACCORDANCE WITH

NATIONAL AND LOCAL ELECTRICAL CODES.

MAKE CERTAIN THAT THE ELECTRICAL
CIRCUIT

TO WHICH THE COMPRESSOR IS

CONNECTED 

PROVIDES PROPER

ELECTRICAL GROUNDING, CORRECT
VOLTAGE AND ADEQUATE FUSE
PROTECTION.

YOUR 

AIR COMPRESSOR IS POWERED BY

ELECTRICITY.  

LIKE ANY OTHER

ELECTRICALLY POWERED DEVICE, 

IF IT IS

NOT USED PROPERLY IT MAY CAUSE
ELECTRIC SHOCK.

REPAIRS 

ATTEMPTED

BY UNQUALIFIED

PERSONNEL CAN RESULT IN SERIOUS
INJURY OR DEATH BY ELECTROCUTION.

ELECTRICAL GROUNDING:  

FAILURE TO

PROVIDE ADEQUATE GROUNDING TO THIS
PRODUCT COULD RESULT IN SERIOUS
INJURY OR DEATH FROM ELECTROCUTION.

SEE GROUNDING INSTRUCTIONS.

Summary of Contents for CPLDC2540P

























Reviews: