background image

2- ENG

A02231

SAFETY GUIDELINES - DEFINITIONS

Indicates an
imminently hazardous

situation which, if not avoided, 

will

result in 

death or serious injury.

Indicates a potentially
hazardous situation

which, if not avoided, 

could

result in

death or serious injury.

Indicates a potentially
hazardous situation

which, if not avoided, 

may

result in

minor or moderate injury.

Used without the
safety alert symbol

indicates a potentially hazardous
situation which, if not avoided, 

may

result in 

property damage

.

This manual contains information that is important for you to know and understand. This information
relates to protecting 

YOUR SAFETY

and 

PREVENTING EQUIPMENT PROBLEMS

. To help you

recognize this information, we use the symbols below. Please read the manual and pay attention to
these sections.

IMPORTANT SAFETY INSTRUCTIONS

Some dust created by power sanding, sawing, grinding, drilling, and other
construction activities contains chemicals known (to the State of California) to

cause cancer, birth defects or other reproductive harm. Some example of these chemicals are:

G

lead from lead-based paints

G

crystalline silica from bricks and cement and other masonry products

G

arsenic and chromium from chemically-treated lumber

Your risk from these exposures varies, depending on how often you do this type of work. To reduce
your exposure to these chemicals: work in a well ventilated area, and work with approved safety
equipment, always wear 

MSHA/NIOSH

approved, properly fitting face mask or respirator when using

such tools.

When using air tools, basic safety precautions should always be followed to reduce the risk of of
personal injury.

READ AND FOLLOW ALL INSTRUCTIONS.

This tool was designed for certain applications. Porter-Cable strongly recommends that this tool NOT
be modified and/or used for any application other than for which it was designed.  If you have any
questions relative to its application DO NOT use the tool until you have written Porter-Cable and we
have advised you.

Technical Service Manager
Porter-Cable Corporation
4825 Highway 45 North
P.O. Box 2468
Jackson, TN 38302-2468

Summary of Contents for CPLDC2540P

























Reviews: