background image

3

indicates an imminently hazardous situation which, if not avoided, 
will result in death or serious injury.

indicates a potentially hazardous situation which, if not avoided,  
could result in death or serious injury.

indicates a potentially hazardous situation which, if not avoided, 
may result in minor or moderate injury.

used without the safety alert symbol indicates potentially 
hazardous situation which, if not avoided, may result in property 
damage.

This manual contains information that is important for you to know and under-
stand. This information relates to protecting YOUR SAFETY and PREVENTING
EQUIPMENT PROBLEMS. To help you recognize this information, we use the
symbols below. Please read the manual and pay attention to these sections.

SAFETY GUIDELINES / DEFINITIONS

SAVE THESE INSTRUCTIONS!

IMPORTANT SAFETY INSTRUCTIONS

READ AND FOLLOW ALL INSTRUCTIONS.

There are certain applications for which this tool was designed. Porter-Cable
strongly recommends that this tool NOT be modified and/or used for any
application other than for which it was designed. If you have any questions
relative to its application DO NOT use the tool until you have written Porter-
Cable and we have advised you.

Technical Service Manager 
Porter-Cable Corporation 
4825 Highway 45 North 
Jackson, TN 38305

Improper operation or maintenance of this product could

result in serious injury and property damage. Read and understand all
warnings and operating instructions before using this tool. When using
pneumatic tools, basic safety precautions should always be followed to
reduce the risk of personal injury.

Summary of Contents for COIL250
















Reviews: