background image

9 — ENG

RISK FROM LIFTING

HAZARD

HOW TO PREVENT IT

WHAT COULD HAPPEN

The generator is too heavy to be
lifted by one person. Obtain assis-
tance from others before you try
to move it.

Serious injury can result from attempt-
ing to lift too heavy an object.

Lifting a very heavy object.

READ AND UNDERSTAND ALL WARNINGS BEFORE 

ATTEMPTING TO OPERATE GENERATOR.

RISK OF MOVING PARTS

HAZARD

HOW TO PREVENT IT

WHAT COULD HAPPEN

Never operate generator with
guarding or cover plates removed.
Avoid wearing loose fitting clothing
or jewelry which could be caught
by moving parts.

The generator contains parts which
rotate at high speed during operation.
These parts are covered by guarding
to prevent injury.

Contact with moving parts can re-
sult in serious injury.

HAZARD

HOW TO PREVENT IT

WHAT COULD HAPPEN

During operation, touch only the
control surfaces of the generator.
Keep children away from the gen-
erator at all times. They may not be
able to recognize the hazards of
this product.

Contact with hot surfaces, such as en-
gines exhaust components, could re-
sult in serious burns.

Contact with hot engine and gener-
ator components.

RISK OF HOT SURFACES

Summary of Contents for BSI550





















Reviews: