background image

4- ENG

A07513

•  Contact with hot surfaces, such as 

engines exhaust components, could 

result in serious burn.

•  During operation, touch only the control 

surfaces of the pressure washer. Keep 

children away from the pressure washer 

at all times. They may not be able to 

recognize the hazards of this product.

•  Spray directed at electrical outlets or 

switches, or objects connected to an 

electrical circuit, could result in a fatal 

electrical shock.

•  Unplug any electrically operated product 

before attempting to clean it. Direct spray 

away from electric outlets and switches.

RISK OF ELECTRICAL SHOCK

HAZARD

WHAT

 

CAN

 

HAPPEN

HOW

 

TO

 

PREVENT

 

IT

RISK OF ELECTRICAL SHOCKRISK OF 

ELECTRICAL SHOCKRISK OF HOT SURFACES

HAZARD

WHAT

 

CAN

 

HAPPEN

HOW

 

TO

 

PREVENT

 

IT

•  Do not use acids, gasoline, kerosene, 

or any other flammable materials in this 

product. Use only household detergents, 

cleaners and degreasers recommended 

for use in pressure washers.

•  Wear protective clothing to protect eyes 

and skin from contact with sprayed 

materials.

•  Use of acids, toxic or corrosive chemicals, 

poisons, insecticides, or any kind of 

flammable solvent with this product could 

result in serious injury or death.

RISK OF CHEMICAL BURN

HAZARD

WHAT

 

CAN

 

HAPPEN

HOW

 

TO

 

PREVENT

 

IT

•  Fuel or oil can leak or spill and could 

result in fire or breathing hazard, serious 

injury or death can result. Fuel or oil 

leaks will damage carpet, paint or other 

surfaces in vehicles or trailers.

•  If pressure washer is equipped with a 

fuel shut-off valve, turn the valve to the 

off position before transporting to avoid 

fuel leaks. If pressure washer is not 

equipped with a fuel shut-off valve, drain 

the fuel from tank before transporting. 

Only transport fuel in an OSHA approved 

container. Always place pressure washer 

on a protective mat when transporting to 

protect against damage to vehicle from 

leaks. Remove pressure washer from 

vehicle immediately upon arrival at your 

destination.

RISK OF INJURY OR PROPERTY DAMAGE 

WHEN TRANSPORTING OR STORING

HAZARD

WHAT

 

CAN

 

HAPPEN

HOW

 

TO

 

PREVENT

 

IT

Summary of Contents for A07513-0412-0



















Reviews: