background image

2- ENG

A07513

IMPORTANT SAFETY INSTRUCTIONS

Do not operate this unit until you have read and understand this 

Operators Manual and the Engine Owners Manual for Safety, 

Operation, and Maintenance Instructions.

RISK OF EXPLOSION OR FIRE

WHAT

 

CAN

 

HAPPEN

HOW

 

TO

 

PREVENT

 

IT

•  Spilled gasoline and it’s vapors can 

become ignited from cigarette sparks, 

electrical arcing, exhaust gases, and hot 

engine components such as the muffler.

•  Shut off engine and allow it to cool before 

adding fuel to the tank.

•  Use care in filling tank to avoid spilling fuel. 

Move pressure washer away from fueling 

area before starting engine.

•  Heat will expand fuel in the tank which 

could  result in spillage and possible fire 

explosion.

•  Keep maximum fuel level ½" below top of 

tank to allow for expansion.

•  Operating the pressure washer in an ex-

plosive environment could result in a fire.

•  Operate and fuel equipment in well venti-

lated areas free from obstructions. Equip 

areas with fire extinguisher suitable for 

gasoline fires.

READ

 

AND

 

SAVE

 

THESE

 

INSTRUCTIONS

This product may not be equipped with a spark arresting muffler. 

If the product is not equipped and will be used around flammable 

materials, or on land covered with materials such as agricultural crops, forest, brush, 

grass, or other similar items, then an approved spark arrester must be installed and 

is legally required in the state of California. It is a violation of California statutes 

section 130050 and/or sections 4442 and 4443 of the California Public Resources 

Code, unless the engine is equipped with a spark arrester, as defined in section 4442, 

and maintained in effective working order. Spark arresters are also required on some 

U.S. Forest Service land and may also be legally required under other statutes and 

ordinances.

Engine exhaust contains chemicals known, in certain quantities, to 

cause cancer, birth defects or other reproductive harm

.

CONSUMER SAFETY INFORMATION

SAFETY GUIDELINES - DEFINITIONS

Indicates an imminently 

hazardous situation 

which, if not avoided,

 will

 result in 

death 

or serious injury.

Indicates a potentially  

hazardous situation 

which, if not avoided, 

could 

result in

 death 

or serious injury.

Indicates a potentially 

hazardous situation 

which, if not avoided, 

may

 result in 

minor 

or moderate injury.

Used without the safety 

alert symbol indicates a 

potentially hazardous situation which, if not 

avoided, 

may

 result in 

property damage

.

This manual contains information that is important for you to know and understand. 

This information relates to protecting 

YOUR SAFETY

 and 

PREVENTING EQUIPMENT 

PROBLEMS

. To help you recognize this information, we use the symbols below. Please 

read the manual and pay attention to these symbols.

HAZARD

Summary of Contents for A07513-0412-0



















Reviews: