3
8.
D I S C O N N E C T T O O L F R O M A I R
SUPPLY HOSE
before doing tool
maintenance, clearing a jammed fastener,
leaving work area, moving tool to another
location, or handing the tool to another
person. Fig. 5.
9.
NEVER USE A TOOL
that is leaking air,
has missing or damaged parts, or requires
repair. Make sure all screws and caps are
securely tightened. Fig. 5.
10. NEVER USE TOOL IF SAFETY,
trigger
or springs are inoperable, missing or
damaged. Do not alter or remove safety,
trigger, or springs. Make daily inspections
for free movement of trigger and safety
mechanism. Fig. 5.
11. DO NOT USE TOOL WITHOUT
SAFETY WARNING LABEL.
If label is
missing, damaged or unreadable, contact
your Porter-Cable Service Center for a
replacement. Fig. 6.
12. ONLY USE PARTS, FASTENERS, AND
ACCESSORIES
recommended by Porter-
Cable. Fig. 7.
13. CONNECT TOOL TO AIR SUPPLY
BEFORE
loading fasteners, to prevent a
fastener from being fired during connection.
The tool driving mechanism may cycle when
tool is connected to the air supply. Fig. 8.
14. ALWAYS ASSUME THE TOOL
CONTAINS FASTENERS.
Keep the tool
pointed away from yourself and others at all
times. No horseplay. Respect the tool as a
working implement.
15. DO NOT LOAD FASTENERS
with
trigger or safety depressed, to prevent
unintentional firing of a fastener. Fig. 9.
Fig. 5
Fig. 6
Fig. 7
Fig. 8
Fig. 9
