I
Operation
一
Insert batteries:
1. Push the battery cover gently in advance
and then pull it out.
2. Insert 2 pcs x 1.5V AA alkaline batteries or
1.2V AA rechargeable batteries.
3. Push the battery cover back to close the case.
Turn the unit on:
1. Tum on the unit by rotating the volume control knob in a clockwise direction.
2. Then, the power I reception indicator will become red.
3. The indicator will turn to green when the unit has received the signal.
At the same time, the LCD is active and shows口亙］
4. The channel is shown on the LCD回冝囝
5. Put the earphone in the earphone jack and adjust the volume.
Channel setting:
1. Select a channel by pressing O O
2. As soon as the channel has been chosen, keep the selected
channel on the display.
3. The channel is set successfully.
Aux out volume control:
This output can be connected with
other amplifiers or speaker.
Powered Speaker
心
l
·
-
a
-』`
I
Operation
-I
LCD display Instructions:
匡互豆]
1. Channel 8
th
is selected and batteries are fully charged.
區
2. Batteries are goi1g to be out of electricity. Please recharge the
unit soon.
巨二二]
3. When the battery frame blinks, batteries are out of electricity.
The frame is blinking until the unit turns off automatically.
*
1. The insufficent power of batteries can influence
the performance on transmission and receiveing
2. To recharge the 1.2V AA (Ni-MH, 1600 mAh)
rechargabel batteries, you need to chose the
specialized chargers, such as the 2-slot charger.
釆
Do not put non-rechargeable batteries In the
charger or It would cause a great danger, such as
explosion or battery leakage.
鯊Please take out of the batteries If the unit has not
been used for a period in order to avoid the leakage.
Turn the unit off:
1. Turn off the unit by rotating the volume control knob in the
couterclockwise direction.
2. Meanwhile, the LCD will show口笠口
3. If there are not other functions being activated, the power/
reception indicator, backlight and LCD will be off.
