Portech MV-370, User Manual

Page: 17 / 61

(5)CODEC Tx Gain: as above
(6)CODEC Rx Gain: as above
(7) SIP From: Caller ID transfer

Tel/User(Standard): If you need to register to Asterisk and proxy
server,please choose this option. And how to transfer the caller
ID to LAN,please refer 22.How to setup Asterisk to receive
Caller ID from MV-370 (page 43)
MV-370-2 will send the message as follows in the Packet.
From: " caller number " <sip:3001@192.168.0.228>;tag=51088abb

Tel/Tel :
MV-370 will send the message as follows in the Packet.
From: "caller number" <sip: caller number @192.168.0.228>;tag=6ac93f7c
※Please note:If you choose this option,please don’t register to
Asterisk and proxy server. Please only fill proxy server ip and
choose Active: on (else field empty) in sip setting/service
demain
 User/Tel
MV-370 will send the message as follows in the Packet.
From: " Username " <sip: caller number @192.168.0.228>;tag=7f130947
※If you choose this option,please don’t register to Asterisk and
proxy server. Please only fill proxy server ip,Username and
choose Active: on (else field empty) in sip setting/service
demain
(8)Presentation CLIR : If you need to block the Caller Id for call
termination,please choose Suppression
(9)Mobile PIN Code:If you need to unlock pin code via MV-370,you can
click “On” and enter pin code.
(10)LAN Answer Mode:
Answered : when mobile answer,then connect the call
Alerted : when the mobile is ringing back tone,then connect the call
Income : when lan dial out,then connect soon
(11)Band Type:When you buy Quad band,you need to choose your
GSM frequency
-13-