39
DGX-620/YPG-625
New USB flash memory must be formatted before they can be used by this instrument.
1
2
3
The display prompts you for confirmation.
4
5
6
Formatting USB Flash Memory
*
CAUTION
*
CAUTION
*
NOTE
Press the FILE CONTROL [MENU] button.
After connecting the USB flash memory to be
formatted to the instrument's USB TO DEVICE
terminal, check that the icon is showing in the
MAIN display.
Use the CATEGORY [ ] and [ ] buttons to
select the Format item.
Press the [EXECUTE] button and the display
prompts you for confirmation.
You can press the [-] button at this point to cancel the
operation.
If you format a USB flash memory that already contains data, all
of the data will be erased. Be careful not to erase important data
when using the format function.
Press the [EXECUTE] button again, or the [+]
button, and the format operation will begin.
Once the format-in-progress message appears on the display
the format operation cannot be canceled. Never turn off the
power or remove the USB flash memory during this
operation.
A message will appear on the display to inform
you that the operation has finished.
Press the [EXIT] button to return to the MAIN
display.
If the USB flash memory has been write-protected, an appropriate
message will appear on the display and you will not be able to
execute the operation.
